Sample List

Aimpoint 3x Magnifier DEMO-C
Product Grading Information
Demo A: Like New In Box
Demo B: Shows Very Slight Wear From Use
Demo C: Shows Obvious Signs of Use

Aimpoint 3x Magnifier DEMO-C

11324, For Aimpoint Sights, w/ LT755

Stock# SPL26175 UPC SPL26175

Only 1 left


Availability: In Stock


  • Manufacture Part #: 11324
  • DEMO-C
  • Finish: Matte Black 
  • Diameter: 30mm
  • Attachment Style: Picatinny
  • Material: Alumninum 
  • Includes LaRue LT755


Aimpoint 3XMag Magnifier Specifications

The Aimpoint® 3XMag magnifying module is specially designed for compatibility with Aimpoint sights and for maximum flexibility and better performance in the field.

The Aimpoint® 3XMag magnifying module is a high quality optic that can be used with any Aimpoint sight for extended range target identification and engagement. This high quality accessory gives the shooter the best of both worlds: rapid CQB aiming with an Aimpoint sight, and long range target acquisition in combination with the magnifier. The Aimpoint TwistMount allows this transition to occur effortlessly and in just a matter of seconds.

Mechanical Interface

The recommended mount for the 3XMag is the Aimpoint® TwistMount, which allows for quick attachment on any MIL-Std 1913 Picatinny Rail. Check if you need a spacer for co-witnessing with the Aimpoint sight.

The 3XMag can also be attached to aftermarket “flip to side” mounts.


  • Mountable on a rail system behind Aimpoint sights
  • Can also be mounted with a regular 30 mm ring
  • Provides extended range to the operator
  • Combines the best of two worlds – CQB & semi-sniping
  • Increases confidence, performance, and flexibility
  • No influence on point of impact – No need for re-zeroing the sight
  • Doubles as handheld magnifying glass monocular.

Aimpoint 3XMag Magnifier
Optical Specifications
Optical Magnification:3x
Clear Aperture (mm):20
Operating Principle:Magnifying device
Aiming Dot Size:uses the reticle of the combining sight
NVD Compatible:Yes
Optical Coating:Anti-reflex, all surfaces and multi-layer. NVD-Compatible 1, 2, 3
Eye Relief (mm):60 - 65 @ full FOV
Eye Relief (mm):40 - 90 @ 5° FOV
Transmission:>60% (700 - 1000 nm)
Resolution:>12 (lp/mrad)
Dioptric Adjustment:Fixed -1.0 D
Power Source
Battery Type:No power required
Physical Specifications
Length (mm):110 (sight only)
Length (in):4 5/16 (sight only)
Width (mm):44
Width (in):1 3/4
Height (mm):41 (sight only)
Height (in):1 5/8 (sight only)
Weight (g):200 (sight only with rubber cover)
Weight (oz):7.1 (sight only with rubber cover)
Housing Material:High Strength Aluminum
Housing Finish and Color:Matte black
Surface Treatment:Hard anodized, matte, with protective rubber armor cover
Height (mm):30 [optical axis - sight and mount (over top surface of Picatinny/Weaver Rail)]
Height (in):1 3/16 [optical axis - sight and mount (over top surface of Picatinny/Weaver Rail)]
Height (mm):39 [optical axis - sight, mount and low spacer (over top surface of Picatinny/Weaver Rail)]
Height (in):1 9/16 [optical axis - sight, mount and low spacer (over top surface of Picatinny/Weaver Rail)]
Environmental Specifications
Temperature Range Operation (°C):-45 - +71
Temperature Range Operation (°F):-49 - +160
Temperature Range Storage (°C):-51 - +71
Temperature Range Storage (°C):-60 - +160
Temperature Shock:Operable after a temperature shock between -45°C and +71°C. Duration: 4h of Hot +71°C, 4h of Cold -45°C. Cycling: 3 times
Humidity:Operates despite humidity. Limits: RH: 95%, Temp: 20 ºC to 50 ºC, cyclic
Submersible:Operates after immersion. Limits: Depth: 1 m (3 ft.)
Shock:Operable before and after shock. Limits: X-axis: 500 g, 0.7 – 1.1 ms (3 shocks), Y-axis: 40 g ± 4 g, 11 ± 1 ms (2 shocks in each direction, Z-axis: 40 g ± 4 g, 11 ± 1 ms, 2 shocks in each direction. Functional during exposure (room temperature)
Vibration:Operates despite vibration. Limits: Vibration, sinusoidal in a frequency range of 10 - 150 Hz. Frequency: 10 - 30 Hz, ± 1.587 mm, Frequency: 30 - 150 Hz. 5.75 g, 1 octave/min
Chemical Resistance:Withstands occasional contamination of: Hydraulic oil (FSD 8407, Tryckolja 021), Lubricating oil (FSD 8127, Motorolja 5W/30), Lubricating oil (FSD 8220, Smörjfett 220), Lubricating oil (Break Free), Fuels (FSD 8612, Diesel fuel oil), Solvents/cleaning (FSD)

Customer Reviews

There are no reviews yet for this product.

to Add Your Review
Sample List